Monday, December 16, 2013

Memory Snowflake release


 
WINTER JOY:
CARD 5 X 7
Card Front:
Items Used:
Memory Box Winter Joy #98640
Cuttlebug Embossing Folder Winter Folic
Spellbinders 5 x 7 Matting Basic A
Crafting Foam
Martha Stewart Punch Around the Page Aspen
Spellbinder Green Foil
Ribbon
Rhinestones
 
I started by embossing the folder with the green foil. I distressed the foil. I then cut out the red paper with the Martha Stewart Punch around the page Aspen. 6 ¾ x 5. I used the Spellbinder’s Matting Basic to cut out the inside of the punch around the page. I then layered the foil under the punch around the page. I then took some white behind the punch around the page and cut it to fit. Add some green foil paper behind it for an extra layer. Added a double bow.  Add rhinestones.
 
INSIDE CARD:
Item used:
Martha Stewart Punch Around the Page Aspen
Spellbinders Large Deckled Mega Rectangles
 Started by cutting a 6 ¾ x 3 ¼ piece of paper. Used the aspen punch to create the borders. I created the sentiment and used a dark red ink. I cut the sentiment out of the spellbinder Mega Deckled Rectangles. Used some of the snowflakes cut from the punch. I made another layer with the red paper and added to the inside.
 

 
 


 
FROSTYVILLE FRAME
6.5 X 5 CARD
ITEMS USED:
Memory Box Frostyville Frame #98718
Memory Box Debutante Frame #98297
Memory Box Country Landscape #98239
Crafts Too Pine Tree Scene CTFD4008
Impression Obsession Pine Trees CC101 C A C
Punch Bunch Pine Trees Medium and Large
Cheery Lynn Sentiment Frame #2 B190
Just-Rite Christmas Mini Sentiments Set
Tim Holtz Distress Ink peeled paint
Stickles Frosted Lace
Ribbon
 
I saw a Tim Holtz video and He was stamping inside an embossing folder. So I tried doing it in the Craft Too pine tree embossing folder with the Obsession Obsessions Pine tree stamp.  I stamp it with Tim Holtz peeled paint ink.  I then took my ink pad and ran it across the embossed trees.  I took my Tim Holtz markers and water pen to run tumbled glasses across the top of the tree line to make sky and clouds. Then I stickled the trees with the frosted lace stickle.  I cut the Frostyville frame out of glitter paper. I cut out the Debutante Frame out of the embossed tress lines.  Placed together only at the top. I cut out the Country Landscape and cut it out again right in line. .  I needed it to cover the whole card.  I left a about two inches for the border line.  I placed the border under the Frostyville Frame . I lefted it hanging out at the bottom and sided. Then glue it in place to the Frostyville frame. Layered under the fame and border. Add the Winter Wishes on the Cheery Lynn Sentiment Frame. Also use the peeled paint on the edges of the Frame. Then add the bow.
 
INSIDED
ITEMS USED:
Just-Rite Christmas Ornaments
Spellbinders Standard Circles
Martha Stewart Punch Around the Page Snowfall
Tim Holtz Markers
Tim Holtz Peeled Paint.
 
I stamped out the Just-Rite and colored the ornament with Tim Holtz Markers and water pen. I cut out the circle on each side of the sentiment. Placed the Ornament under the circle.  I used the border punch from the Martha Stewart Snowfall.  I cut right next to the snowflakes about ¼ of an inch. If you snip next to each side of the snowflakes you can then turn it to go around the circle. Then you can glue down.
 

 
SWIRLING SNOWFLAKES:
CARD 5 X 7
FRONT OF CARD:
Items Used:
Memory Box Swirling Snowflakes #98653
Memory Box Frosty Border # 98171
Marianne Design Poinsettia’s Miniature #lr0142
Spellbinders 5 x 7 Matting Basics B
Martha Stewart Punch Around the Page Snowfall
Spectrum Noir Markers
I printed the image and colored it in. I also cut the Angel out of the image. I then cut out the Swirling Snowflakes. Cut out the punch around the page and then use the  5x 7 matting basics to cut out the center of the punch around the page. Then placed the Swirling Snowflakes under the punch around the page.  Placed another color under the whole frame. Then placed the angel were you want. I did raise the angels head up. Then cut out 2 of the Frostyville Border. I cut them in two. Cut out the poinsettias and of course sand the top of them. Place the cut Frostyville border under the Poinsettia’s.
 
INSIDE CARD:
 Items Used:
Memory Box Frostyville Wreath # 98418
Spellbinder Standard Circle #S4-114 and S4-116
I printed up the sentiment on the computer and the cut out the circles. Add the Frostyville Wreath.
 


FROSTYVILLE CORNER
Card 7 x 6
Inside card:
Memory Box Frostyville Corner #98637
Memory Box Frostyville Border # 98171
Nellie Snellen Embossing Folder Snowy Village Pif001
Spellbinders 5 X 7 Matting Basic A & B
Cheery Lynn Snowflakes C146
Die-namics Layered Rose 6414
Mulberry Rose
Rhinestones
Oil Based Pencils
Tim Holtz black soot ink
Tim Holtz Distress Stickles Candy Rock
Ranger Stickle Frosted Lace
 
I started by embossing Snowy Village. I ran my ink pad across the side that has the narrow edges on it.  I looked at a it and thought it need to be colored in. Took out my pencil and colored them in. I did use baby oil to blend the pencil lines. I used the candy rock stickle to make the snow look shiny and glittery. I then took the frosted lace stickle made the trees look like they had some snow on them.  The spellbinder basics were used to make a frame.  The Frostyville Corner was added to the right side of the frame. I placed the frame over the embossed paper and trimmed it to fit. I also made my normal layers around the card. Placed the frame and embossing folder toward the top of the card. Add the Frostyville border to the bottom of the card. I made some snowflakes and attached to the frame. In the upper left hand corner I made a flower with the layered rose, a snowflake and a mulberry rose. I cut out the Frostyville corner and cut parts out to ad under the flower. Added rhinestones anywhere I thought they should go.
INSIDE:
Item used:
Spellbinders Romantic Rectangles S5-090
JustRite Stamps Christmas Nested Frames
Embossing Podwer
Ink
 
I stamp the frame and sentiments and used embossing powder. I trimmed each one to fit. Layered the Romantic Frames behind them.
 

 
2 Frostyville Corner
Easel Card 6.5 x 5
Front of Card:
Items used:
Memory Box Frostyville Corner # 98637
Rhinestones
I shaped the front of the card so the Frostyville corner would fit. Cut a layer on the top and add Rhinestones.
 
Inside of Card:
Left Side:
Items Used:
Memory Box Frostyville corner #98637
Spellbinders 2010 Snowflake Pendant S4-286
Cheery Lynn Merry Christamas #B186
Ribbon
Rhinestones
I looked online how to make an easel card. I used the card and scored in in half.  It makes the correct size for a rectangle. Cut the green paper to fit just inside the card. I used a 3-d decoupage from http://www.freecraftdownloads.co.uk/paper2/decoupage/christmas_new/1christmas_decoupage02
You do have to cut it out. Not too bad. I put the spellbinders Snowflake Pendant behind the 3d decoupage.  Add the Frostyville Corner under the decoupage. Then added rhinestones to the Frostyville corner.
Inside:
Cut the paper to fit add the Frostyville corner to the paper and trim it to fit. Add rhinestones.
.
 

Sunday, November 10, 2013





OVAL FRAMES

CIRCLE EASEL CARD

Used on card:

Joy Craft Oval Frame 6002-0258

Sweet Cuts Tulip Oval SC005

Memory Box Dancing Tulips 98295

Spellbinders Large Deckled Rectangles S4-202

Spellbinders Classic Ovals S4-112

Lifestyle Crafts Nesting Circles L-CC-001

Spellbinders Grand Decorative Elements LF-015

Cuttlebug A2 Combo Everyday Greetings 1464825

White Satin Ribbon

 

I made the circle easel card from following this video:


After you make the card cut out the dies and place on the card. The tulips in the center I cut out twice and place the white were the tulips are. This is where I found the digi-stamps. I did spray the paper with workable fixative so it did not run with the oil pencils.  I use baby oil to blend the pencil so it was smearing the black ink.


I cut out the stamp and used foam to raise it up. Again I used the ribbon to help hold the top of the card. I put the hi there on the ribbon. Add 2 bows and you are done.

 



 
 
 
 

ICE CRYSTAL
5 X 7 EASEL CARD
USED INSIDE CARD:
Joy Craft Snowflake Ice Crystal Edge 6002/2021
Joy Craft Snowflake 1 6002/2018
Joy Craft Snowflake 2 6002/2019
Joy Craft Snowflake 3 6002/2020
Spellbinders Grand Rectangles LF-132
Spellbinders Grand Scalloped Rectangles LF-133
Cheery Lynn Horizon Coved Rectangle Boutique Stacker Frames DL251
Cheery Lynn Horizon Oval Boutique Stacker Frames DL252
Spellbinder Petite Ovals
Lifestyle Crafts Nesting Inverted Circles LC-DC0276
Memory Box Frosted Christmas Tree 98668
Sweet Cuts Winter Village Scene Circle SC064
Spellbinders 2012 Snowflake Pendant S5-117
Cheery Lynn Snowflakes C146
Sizzix Winter by Emily Humble
Velvet paper
Memento Angel Pink ink
Rhinestones
I decided to make an easel card. I started with the Spellbinders Grand Rectangle. You score the paper in half and keep it folded and tape it so it just misses the cutting blades on one side.  You then fold the top part in half. Instead of cutting the rectangle again I decided to use the Grand Scalloped rectangle.  When I placed on the fold half of the card I made I noticed that the edges show below. So I trimmed about a quarter of an inch from each of the three sides. You just glue it to the top half of the card you made. You can also find a video on how to cut this.  I then cut out the Horizon Coved rectangle and placed on both. I then cut out the Horizon ovals and the Petite ovals. Then put them in place. Stamp the center of the inside oval with Winter wonderland. I then made the Winter Village Scene. Cut out with each color and then glue in the circle. I used the Inverted circle on the bottom of the winter scene. Cut out the 2012 Pendant die and place behind all of that.   I used foam Squares to raise it up. I made the Frosted tree by take the pink ink and using a dauber to color the embossed spots.  I also cut out many of the Cheery Lynn snowflakes add to the tree for ornaments. Placed the Ice crystal border. Then place the Frosted tree on top of that. I use to of the Ice Crystal and layered on top of them and place I the oval. The lower half of the card I added the ribbon so I would keep the card standing up. I add the Ice Crystals border just under the ribbon. Then take two more Ice Crystals add were you like. Take your Rhinestone and place them in the middle of all the snowflakes. The finishing touch.
 

 
 

 

 
ICE CRYSTAL CIRCLE
 Ornament
Items used:
Joy Craft Ice Crystal Circle 6002/2022
Spellbinders Gold Majesty Circles S4-409
Mulberry Aster
Rhinestones
Snowflake from Hot Of the Press Flying Reindeer HOTP5312
 
All I did was cut out five times the Joy craft die and the spellbinder die and the snowflake I used. Score the Gold Majesty in half. Then glue half sections at a time. Once I had two attached I added the ribbon to attach to a Christmas tree. Add the rhinestones. Attach the flower thru the snowflake and place in the center of the circle.
 
 


SNOWFLAKE SPINNER
4 ¼ X 5 1/2 Card
ITEMS USED:
Joy Craft Ice Snowflake Crystal 6002/2020, 6002/2018 and 6002/2019
Lifestyle Craft Circles L-CC-001
Lifestyle Craft Inverted Circles DC0276
Spellbinders Small Deckled Mega Rectangles
Marianne Design Snowman LR0246
Marianne Design Merry Christmas LR0225
Whimsy Stamps Snowflake Border WSD172
Sizzix Embossing Folder Christmas Set 655841
Cuttlebug Embossing Folder (could not find any information on)
Sizzix Winter by Emily Humble
Tim Holtz Distress ink Faded Jeans
Ranger Stickle Diamond
 
 
 
Follow the tutorial I found on-line to make card. I did use a little different item. You can do many different thing in the center.
I ran my ink pad over the embossed snowflakes. When I made the snowman I use a dauber to color the raised embossed areas. I used stickle on the raised parts of the snowman and all the snowflakes on the embossing folder. The blue paper I sprayed with Spry and Sparkle Iridescent.  I add the Snowflake border to the sides of the card with rhinestones In the center of the snowflakes. I stamped the let it snow and cut it with the Deckled mega rectangles. I also shorten on side by cutting with a deckled blade. Also embossed with the Deckled rectangle. I raised the Let it snow and the snowman with foam squares. I added the snowflakes it the top of the inside of the card. I also added the Merry Christmas to the inside under the snowflake spinner.
 

Sunday, October 13, 2013

 
 

SPIDER WEB MESH BORDER

STEPCARD 5 5/8 X 5 5/8

Items used for front of card:

Cheery Lynn spider web mesh border b322

Cheery Lynn Witch’s Laundry B334

Cheery Lynn Step Card B348

Cheery Lynn Happy B226

Cheery Lynn Halloween B344

Quickutz Bats I-I-0082

Quickutz Witch RS-0184

Sizzix Bare Tree 38-0207

Digi Witch Stamp

Workable Fixatif

Foam

Twine

Spectrum Noir Markers

Cut out the Step card. The Inner piece for the front of the card, I took white glitter paper and cut the border twice. I attached to that piece of paper and trimmed around the piece of paper. Attach all the pieces to the card. I cut the Sizzix Bare Tree in half and glue to each side of the middle. The Witch’s Laundry I cut out each color and cut them off the line.  I also cut all the items hanging off the line out of matching foam. The clothesline I attached to the tree with twine with a dab of glue in the middle of the line. The Clothes are just hanging. Cut the rest of the items and attach. The witch I got online at:


I colored with the markers. I did spray the image with Workable Fixatif. It seemed to help so it did not smear the ink.

Inside card:

Cricut Cuttin’ Up



 
FALL LEAF DOILY
EASEL CARD  7.5 X 5.5
USED IN CARD:
CHEERY LYNN FALL LEAF DOILY DL249
CHEERY LYNN FALL LEAF MESH BORDER B325
CHEERY LYNN SCALLOPED RECTANGLE MEGA DOILY DL199
CHEERY LYNN LEAF STRIP B178
CHEERY LYNN LEAF EDGER B277
CHEERY LYNN HAPPY B226
CHEERY LYNN THANKSGIVING B234
CHEERY LYNN FANCIFUL FLOURISH B117
CRAFTY ANN FLOURISH 2 FLRS-2
SPELLBINDERS FALLING LEAVES HCD 707
IMPRESSION-OBSESSION MAPLE LEAVES CC067 C-A-C
TIM HOLTZ DISTRESSED INK SQUEEZED LEMONADE, RIPE PERSIMMON, PEELED PAINT, AND BARN DOOR
 
Start with the Cheery Lynn scalloped rectangle. I used the largest one to make the card. Score it in half and cut the card. I did have to cut the one side again. I then cut it again and used it for the top. You fold the top part of the card in half to attach the card top. Check on-line you can follow what they do. Cut out the Leaf Doily and the border. I then took a piece of white paper and used my dauber with the ink and alternate the color. After you have enough filled in, cut out the leaves in both of them. I cut them out and glued them on the bottom of each leaf so they will be raised at the top of the leaf. Then stamp the impression obsession stamp. I stamp each of the colors across the stamp. I stamped it side by side. I cut the red and the yellow to fit the card. I attached the leaf edger across the top and the bottom. Place the Crafty Ann Flourish in the corner. Place the Fanciful Flourish in the right corner. I placed the leaf strip pieces under the Leaf Doily. I placed about every 5.5 sections. Place the Leaf Mesh Border at the bottom of the card. I then used my daubers again to make some more colored paper. Cut the Spellbinder Falling Leaves out. I did cut extra one for each leave so it would hold the card. I used foam square to raise them up. It holds the card great.  I also used the foam squares to raise it up the Leaf Doily.




HALOWEEN ROOM
6 X 6 X 7.5
Items Used:
Cheery Lynn Spider Web Mesh Border B322
QuickKutz Coffin Box DC0372
Memory Box Grand Madison Window 815
Martha Stewart Circle Punch Spider Lace 42-93015
Sizzix Count Dracula 655558
Dei-namics Spider Web MFT-218
Flower Soft Black & Silver
Googley Eyes
Spray Sparkle Iridescent and Silver
Purple Tulle
Paper stack card board
Box material
Witch or any other item you would like to put in coffin.
I made the wall out of the cardboard that comes from the back of the paper stacks. I used a piece of box for the floor. I scored the purple paper for the floor so it would go around the box material. Add the Circle punch to the center. I sprayed then with the iridescent glitter first and then the sliver. I did this also for Dracula cape and the Happy Halloween.   I then cut out the wall out of the card board and scored it. Remember to make it 10.5 inches long by 6 inches. You need 2. Score them at 3 inches. The 3 inches goes under the floor. The orange wall was scored the middle and I attached the spider web border borders. You do need 6. The spider web paper is glittery white or off white. When you attach the wall to the room it keeps the card board side up in place. The window I made and added the googely eyes to Dracula. The coffin I cut with black cardstock and then cut it again with a stripe Halloween paper.  I put the stripe inside the coffin. I did use my black maker to the top edges of the paper on the coffin so you could not see the white edge. Put your witch inside and add the Happy Halloween to the top of the coffin. The spider was made with black cardstock and I sprayed with the glitter spray. The take and add small googley eyes. I mixed a little of the silver flower soft with the black and glued to the spider. Make a bow out of the tulle and add the spider.
 
 

Friday, September 27, 2013

My Second Release For Dutchpaper Crafts:

 
 
 
WEDDING HORSE AND COACH
SHADOW BOX 6 X6
ITEM USED:
Shadow Box White 6 x 6
Joy Craft Wedding 6003/2002
Impression Obsessions Clouds CC091 C-A-C
Spellbinders Pumpkins S4-227
Lifestyle Craft Nesting Ovals L-CC-004
Cheery Lynn Lace Corner Deco D B146
Memory Box Lavish Branch 98486
Cheery Lynn Sweet Williams B307
Memory Box Butterfly Vine 98458
Memory Box Dancing Butterflies 98576
Nellie Snellen Floral Punch FLP0032, FLP003, FLP020 and FLP034
Mulberry Carnation
Tulle
Ribbon
Semi Trans Embossing powder Guilded Ivory
Flower Soft Polar White
Sparkly Fluff Sugar CFS03
One Googly Eye
Disney Princess Sticker of Cinderella
Rhinestones
Gold pearls
When cutting out the die I started with a 6.5 inch by 10 inch piece of paper.  I then cut it out again and used the pieces to make the things I need. I stamped and embossed the cloud stamp on the back of the paper. Cut it out to fit and glued to the template. The lower part was cut to fit inside the box.  I did cut a quarter of an inch off of both sides.  I then colored the bottom of the piece black as well as the wheels. I cut out the horse off the paper and used the flower soft on the horse. I then added the sparkly fluffy on the tail. Added the googly eye of the horse eye. Glue in place.  I cut out the pumpkin with gold paper. I used the smallest die in the nesting ovals to create the door. I also used the third smallest to make the curves in the pumpkin.by embossing it. Add the Lace corner die to the top of the pumpkin. Place the rhinestones and there is the carriage. Glue to the coach. I used the tulle to make curtains. I used 4 layers. I use score tape to hold them in place. I did have to cut the smallest one I had in two to attach to the top of the box. I used ribbon to tie them back. I did use score tape to hold in place.  Then cut out the Lavish Branch and cut it in two. I made the flower and placed in the left hand corner. Add rhinestones and pearls to the centers. The right hand side I use the Butterfly Vine. Add the Dancing butterflies to the center. Use some more flower. A great gift for a girl.
 
 
 
 
 



 
WEDDING CHURCH
5 ¼ X 5 ¼ CARD
Card inside:
Joy Craft Wedding Church 6003/2001
Cuttlebug Geometric Rings 2001295
Crafty Ann Frame with Cross Fr-9
Cherry Lynn Happy B226
Cheery Lynn Anniversary B243
Ellison Design Snickle Script 
Marianne Design Rings LR0238
Nellie Snellen Cameo Vintage Head CAMP006
Nellie Snellen Cameo Die Small Vintage CAD006
Joy Crafts Floral Flourish 6003/0008
Epiphany Crafts Vintage Settings  
Ribbon
Mulberry Rose
Pearls
 
I started by cutting out all the pieces.  Place a piece of gold paper behind the church. I double sided the card. Emboss the Geometric rings and cut it with the church die to match the cuts. I glued to the bottom. Place the Frame with cross in place. Add the cross and Happy Anniversary. Put the 50 on each side of the steeple. Add ribbon on top and bottom. I made a triple bow to add to the cross. I made the Cameo by using Epiphany Crafts Vintage settings. I spray pearl mist on it. Made the Cameo with the Nellie Snellen punch. I did spray with water and let it dry on the punch. I filled the back with dimensional Glue. Cut the Cameo die out of gold and glued to the Vintage Setting.  Put the ribbon thru the doves and attach the embellishment.  Tie in a bow.
 
Top of Card:
Joy Craft Corner 6002/0148
Pearls
Ribbon
 
Tag:
Magnolia DooHickey Dream Tag 039308
Marianne Design Ring LR0238
Ribbon Cuttlebug Olivia 37-1058
Pearls
 
 
 


 
 
TREES CHRISTMAS
5.5 X 5.75 Card
Inside Card
Items used :
Joy Craft Christmas Tree 6003/2004
Marianne Creatable Poinsettia’s Small LR0121
Marianne Design Holly Branches LR0244
Spellbinders Layered Poinsettia S5-055
Cheery Lynn Happy Holiday Set B185
Velvet paper Blaze and Alpine
Glass Beads
Rhinestones
Start by cutting out the Joy Craft trees 5.5 by 11. I cut out the solid red about ½ big than the pattern. I then attached them together. Letting the red show around the pattern paper. I recut out the Joy Craft but only used enough of the green velvet paper to cut out the trees. Cut them out and attached to the pattern paper. Then cut out 2 sets of the Holly Branches and add rhinestones to them. Make the poinsettias . I curled the petal back to make them stand up better. I place the glass beads in the middle.  Glue down the branches and the flower were you like. I added rhinestones to the trees and the small holes that the Joy Craft dies made. I cut out the Happy Holiday out of the red and the green. I used just the green on the holly leaves. And add rhinestones to the leaves. Make a double bow and add above the Happy Holiday.
 
 
Card Top:
Martha Stewart Punch Around the Page Holly Leaves D4B8A01A
Nellie Snellen MFD016
Magnolia DooHickeys Dream Tag 039308
Martha Stewart Holly E653FEF7
Cuttlebug Olivia  37-1058
Rhinestones
Hole punch
 
Cut out Martha Stewart Punch around the page Holly 5 x 5. Then the Nellie Snellen attach to the top. Cut the tag and add the to and from and the holly punch. Do not forget the rhinestones.




REINDEER AND PINE TREES

6 X 6 CARD

Inside of card:

Joy Craft Reindeer and Pine trees 6003/2003

Memory Box Frostyville Frame 98718

Memory Box Debutante Frame 98297

Memory Box Frosty Border 98171

Memory Box Deer Trio 98116

Marianne design Merry Christmas LR0225

Cheery Lynn Mini Pearl Rectangle DL198

Creative Impressions Stamp

Ranger Embossing Tinsel Snowflake

Rhinestones

Ribbon

 

Cut the reindeer and pine trees out of the blue paper. Recut it with white paper. Add white behind the birds. Cut off the trees and the reindeer and glue to the blue. I stamped the scene with blue ink and then used the embossing tinsel snowflake. Use the Debutante frame to cut out the stamp image.  I then cut the Frostyville border out of the blue.  Cut the Mini Pearl Rectangle to fit the frame. Add at an angle to the card. Add rhinestones to the snowflake in the frame. Place the deer trio so they look like they are looking through the frame. I cut the Frosty border with each color and layer on top of each one. Add Rhinestones. Place at the top of the card and place Merry Christmas and a white bird to the top. Make a double bow.

 

Card top:

Memory Box Frostyville Corner 98637

Rhinestones

Tag:

Magnolia DooHickeys Dream Tag 039308

Cherry Lynn Snowflakes

Cuttlebug Olivia 37-1058

Rhinestones C146